Any machine is composed of various components, which are in operation when the need for different internal components to collaborate with each other, and filling machine is one of the important components of its pneumatic components, so that the machine is related Of course, the most important thing to maintain the number of pneumatic components, and today we have to learn about how to Pneumatic components for maintenance:

First of all we have to know for the cylinder after normal use, we often have to check the system of water strainer and lubricator work, and in time for the water refueling operation.

Second, for one of the stepless speed regulation motor maintenance, for the newly purchased stepless speed regulation motor is generally used 100 hours later, it should be replaced once the new oil; but after the use of 500 hours, the second oil change.

Also for the machine, especially in the absence of special circumstances, users try not to disassemble the governor parts, mainly to prevent damage to the transmission accuracy, the dangerous consequences. If it is not to be demolished, it should be started in accordance with the speed motor, the speed adjusted to 800 rev / min or more, and then removed at the front cover. The other is not to impact the output shaft.

Another is the machine if it is not working in the cooling conditions of the environment, then it is necessary to increase the ambient heat sink.

Finally, we must pay attention when the stepless speed motor surface temperature exceeds 90, C; or abnormal noise and vibration, please stop checking. And pay attention to prohibit speed control operation when downtime.

Careful care filling machine, minimize or avoid failure, is our fundamental to improve work efficiency.